Contact Us

E-Lins Technology Co.,Ltd

Address: Floor 12, U chuanggu, Xinniu Rd, Minzhi, Longhua, Shenzhen, 518000, China

Contact us: Jason Zou

Tel: +86(755) 2923 0581

Fax: +86(755) 8370 0465

Mobile: +86 186 8208 6117

E-mail: sales@e-lins.com

Web site:http://www.e-lins.com/EN/index.html

Exhibition
Home > Exhibition > Content

5.8GHz 300Mbps 10km Wireless Access Point Network Bridge WiFi Transmitter Receiver St58t8g23


Product Detail

Basic Info

  • Model NO.:ST58T8G23

  • Use:Network Bridge, Ap, WiFi Transmitter Receiver

  • Frequency:5.15-5.825 GHz

  • Transmission Distance:5-10km

  • Antenna:Built-in 23 dBi Dual-Polarized Antenna

  • Standards Compliance:IEEE 802.11A/N; IEEE802.3; IEEE802.3u

  • Sdram:32 M Byte

  • Flash:8 M Byte

  • Network Interface:10/100 Base-T RJ45 Interface

  • Bandwidth:up to 300Mbps

  • Transmission Mode:Point to Multi Point

  • Trademark:suntor, OEM

  • Specification:one transmitter,one receiver,

  • Origin:Shenzhen, China

Product Description

5.8GHz 300Mbps 10KM wireless access point network bridge WiFi transmitter receiver ST58T8G23

ST58T8G23 Product introduction:

Industrial-level wireless digital bridge is a very high ratio of outdoor wireless bridge, over a long distance to work on 5 GHZ frequency band, the 2 x 2 MIMO technology, the highest bandwidth of up to 300 Mbps (2T2R). The graphical user interface, and support in both Chinese and English interface, easy to debug and installation of engineering technology at home and abroad. ST58T8G23 built-in 23dbi dual-polarized antenna gain high transmission distance, can reach more than 10 km transmission distance ( PTP) . In the 10 km distance transmission bandwidth can reach 40 Mbps. In bridge mode point to multipoint transmission can support 1 to 8, the main equipment can write 8 groups of MAC address. Practical application can use point to point, point to multi-point combinations. RJ45 interface, electrical interface for main transmission TCP/IP network data flow, so in the use of can all signal transmission based on the network transmission, multimedia such as video, audio, RS485 command control , and network data flow .


Application diagram:


Specification :
Standards Compliance IEEE 802.11a/n; IEEE802.3; IEEE802.3u
Chip Atheros AR7240+ AR9280
SDRAM  32 M Byte
Flash  8 M Byte
Network interface 10/100 Base-T RJ45 interface
Modulation BPSK/QPSK/16QAM/64QAM(OFDM)
Transmission Rate -802.11a: 6Mbps/9Mbps/12Mbps/18Mbps/24Mbps/36Mbps/48Mbps/54Mbps(OFDM)
- 802.11n: 15 Mbps /30 Mbps /45 Mbps /60 Mbps /90 Mbps /120 Mbps /135 Mbps /150Mbps( MIMO 20MHz)
30 Mbps /60 Mbps /90 Mbps /120 Mbps /180 Mbps /240 Mbps /270 Mbps /300Mbps(MIMO 40MHz)20-MHz, Bandwidth: MCS 0~15 Support data speed
40-MHz Bandwidth: MCS 0~15 Support data speed
Working Frequency 5.15~5.35 GHz
5.47~5.7 GHz
5.745~5.825 GHz
Transmission Power Up to 29 ± 2 dBm
Receiving sensitivity  -92dBm @ 11Mbps, -73dBm @ 54Mbps, -73/-69dBm @ HT20/HT40 MCS15



Feedback
This is E-Lins Technology Co.,Ltd, If you have any questions, requests, etc., please feel free to use this form to contact us. All your comments and suggestions are welcome.
Contact us

E-Lins Technology Co.,Ltd

Address: Floor 12, U chuanggu, Xinniu Rd, Minzhi, Longhua, Shenzhen, 518000, China

Contact us: Jason Zou

Tel: +86(755) 2923 0581

Fax: +86(755) 8370 0465

Mobile: +86 186 8208 6117

E-mail: sales@e-lins.com

Web site:http://www.e-lins.com/EN/index.html

Copyright © E-Lins Technology Co.,Ltd All rights reserved.