Contact Us

E-Lins Technology Co.,Ltd

Address: Floor 12, U chuanggu, Xinniu Rd, Minzhi, Longhua, Shenzhen, 518000, China

Contact us: Jason Zou

Tel: +86(755) 2923 0581

Fax: +86(755) 8370 0465

Mobile: +86 186 8208 6117

E-mail: sales@e-lins.com

Web site:http://www.e-lins.com/EN/index.html

Exhibition
Home > Exhibition > Content

5W WiFi Wireless Broadband Amplifier Router 2.4GHz Power Range Signal Booster Wide Power Input


Product Detail

Basic Info

  • Model NO.:HS2405X1

  • Type:WiFi Signal Booster

  • Dimension:103.5mmx96.5mmx30.5mm:Weight: 0.3kg Net

Product Description

Product Description
The 2.4GHz WLAN signal booster is designed for IEEE 802.11b/g/n Wireless LAN applications. It adopts the direct sequence spread spectrum(DSSS) and orthogonal frequency division multiplexing(OFDM) technology of WLAN communication. The product is compatible with time division duplexing (TDD) method of WLAN and using rapid microwave detection technology to provide high linearity amplification. The signal booster can work with most WLAN/WI-FI devices and increase the WLAN coverage and more stable transmission rate.

Key Features
20X the power, improving the link quality and coverage of certified WLAN devices
2.5dB ultra-low noise
Wide 6V to 55V operating input range
Working with certified IEEE 802.11b/g/n Wireless LAN devices
Simply plug and play, no software is required

Specifications
Frequency Range: 2.4~2.5GHz
Operating Voltage: 6~55V
Receiving Gain: 25dB ± 1
Transmission Gain: 13dB ± 1
Input Trigger Power: Min: 3 dBm Max: 30dBm
Maximum Output Power(P1dB); 37 dBm (5W)
EVM: 3%@29dBm 802.11g 54Mbps OFDM 64QAM BW 20MHz
DC Supply Current: 575mA@Pout 29dBm 12V
Noise Figure: <2.5dB
TX/RX Switch Time Delay: < 1 us
LED Indicator: Transmitter: Green; Receiver: Red
Operating Ambient Temperature: -40 deg C~+70 deg C
Operating Humidity: Up to 95% rel. Humidity
Dimension: 103.5mmX96.5mmX30.5mm
Weight: 0.3Kg net

Installation Instructions
Step 1: Disconnect power supply to AP/Router.
Step 2: Detach the antenna from your certified wireless AP/Routwe
Step 3: Connect Rg 316 cable to the booster and AP/Router
Step 4: Connect the antenna to the other end of the booster
Step 5: Connect the power supply to the booster first and subsequently the AP/Router


Feedback
This is E-Lins Technology Co.,Ltd, If you have any questions, requests, etc., please feel free to use this form to contact us. All your comments and suggestions are welcome.
Contact us

E-Lins Technology Co.,Ltd

Address: Floor 12, U chuanggu, Xinniu Rd, Minzhi, Longhua, Shenzhen, 518000, China

Contact us: Jason Zou

Tel: +86(755) 2923 0581

Fax: +86(755) 8370 0465

Mobile: +86 186 8208 6117

E-mail: sales@e-lins.com

Web site:http://www.e-lins.com/EN/index.html

Copyright © E-Lins Technology Co.,Ltd All rights reserved.